UV LED Photo-Curing Machine is to be Something

Material and Advantages :

1.Long Service Life

Only 800 - 3,000 hours of mercury life, the life of UV LED photo-curing machine system is 20,000 - 30,000 hours. According to DUIY = 1/5 (preparation time = 5 exposure time = 1), the life cycle of the LED is equivalent to 30 - 40 times the mercury lamp. Reduce lamp replacement time, improve production efficiency, and also improve energy efficiency. Traditional mercury lamp curing equipment at work, due to the slow start of the mercury lamp, the life of the light on and off must always be lit, which will not only cause unnecessary power consumption and shorten the working life of the mercury lamp.

2.Environment Pollution

The traditional solidification machine of mercury lamp uses mercury lamp to illume means, bulb has mercury, waste treatment, transport is very troublesome, ultraviolet guide is handled improperly can cause serious pollution to the environment. Using semiconductor photo-solid curing machine, no pollution to environmental factors. Therefore, UV LED light curing machine is more environmentally friendly.

3.No Thermal Radiation

High power LED is not infrared emitting. Irradiation product surface temperature is lower than 5℃, and the traditional mercury lamp type UV curing machine often leads to the surface products increase the 60-90℃, lead to products replace, lead to bad product. UV LED Curing method is applicable to the thermal sensitive and high-precision welding process requirements such as plastic substrate, lens combination, electronic products, optical cable, etc.

4.Super Lighting

High power UV LED chip and special optical design enable high accuracy ultraviolet light and high intensity irradiation. The energy density is up to 8600mW/cm2. High strength output and uniformity, UV LED light curing machine is more optimized than traditional mercury lamp, almost double that of traditional mercury lamp, making UV adhesive clearer and greatly improving production efficiency. The traditional mercury lamp mode increase the exposure channel, and the increase of the channel will result in the reduction of energy output of the single irradiation channel. With UV LED photo-curing machine radiator, each radiator head is independent of the light, the radiator energy is not affected by the increase of the channel, and always remains at the maximum value.

5.Low Energy Consumption

Ultraviolet light is 10 times more efficient than a mercury lamp. Mercury lamps, whether or not they are effectively irradiated, need to be kept lit, and electricity is consumed. When UV LED curing light mode only consumes power when irradiated, and the power consumption is almost zero when standby.

https://www.leduvcuring.com/blog/UV%20LED%20Photo-Curing%20Machine%20is%20to%20be%20Something_b37

Classify

UV LED light curing machine (the light source is ultraviolet light emitting diode), including UV LED spot light source, UV LED surface light source, UV LED linear light source.

The Advantages of UV LED Curing Light :

1.Longevity : tit’s 10 times longer than the traditional mercury lamp curing machine, about 25,000 ~ 30,000 hours.

2.A small amount of heat, UV LED photo-curing machine can solve the equipment heat, employees can not tolerate the problem.

3.Instantaneous light, no need to warm up immediately to 100% power UV output.

4.Service life is not affected by opening and closing.

5.High energy, good output stability, radiation uniformity, improved production efficiency.