Wednesday, May 26, 2021

Original Binding 250nm-410nm UV INT 150 UV-Integrator Radiometer

 The UV-150 Integrator tester is a high quality UV measuring instrument. It is used to  measure UV energy of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying processes.

The UV-Integrator 150 Energy Meter is used to measure UV energy and UV does of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying process.


250-410nm UV Light Intensity Meter Detector


Technical Data:

Spectral range: UV 250-410nm

Measuring range: 0 to 5,000 mW/cm2

Display range: 0 to 999,999 mJ/cm2

Display: 6-digit LCD

Power source: long-life 3.6V Lithium Battery

Power consumption: 100uA

Battery service life: 10,000hrs

Dimensions: 3.5” (90mm)φ, 0.5” (12mm) height

Weight: approx5.5 oz(150 gr.)

Temperature range: 0 to 70 Centigrade

Temperature range: 0 to 45°Celsius

While on the conveyer belt, the UV-Integrator 150 can withstand max. 230° F(110°C) for up to 1O seconds.

Heat protection: Heat shield on back plate

Base Accuracy: +-5 %


Instruction for use:

1.Switch on the UV-Integrator 150.

The display will show “0”

2.Place the UV-Integrator 150 with the front facing the conveyer belt.

The sensor is on the back.

The back plate of the UV-Integrator 14 serves as the heat shield.

3.After the UV-Integrator 150 has passed through the conveyer, take the UV-Integrator from the conveyer belt in order to read the measuring result.

The measuring results are shown as: mJ/cm2

4.Prior to new measuring sequence, it is necessary to switch “off" and then “on” again.

This will reset the display to “0”.

Continue as described in Step 2.


Calibration:

In order to keep its full function and precision it is recommended to have re-calibration done once per year.

Re-calibration will also be necessary after change of battery.


Warranty: 

1 years from the date of purchase.


250nm-410nm UV Energy Meter Tester used for UV Curig Furnace


250-410nm UV 150 Energy Meter Tester Specification

Monday, May 24, 2021

UV-DESIGN UV Integrator 140 High Temperature Resistance Ultraviolet Energy Measuring Instrument

Standard UV INT140 Integrator is measuring an integral in the spectral range from 250-410nm, with a peak at the area of 330nm.

Big size round shape UV-Integrator 140 UV Lamp Intensity Meter Tester for measuring UV dose (mJ/cm2), diameter 140 mm, height 13 mm, various spectral ranges available. Special feature: Kidney shaped recess in the housing for convenient handling.


UV Irradiance Measurement Detector


By addition of the incidence of the light quantities during the exposure cycle, relative values are calculated.


Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear under the same measurement conditions.


Brand : DESIGN

Place of origin : Germany

Name : UV Integrator 140

Application : UV printing, coating, glue, ink curing, drying, glazing and other fields

Industry : mobile phone shell, PCB, UV board, floor, plastic keys and other electronic industries and a variety of other industries.

Applicable equipment : UV LED light curing source, UV exposure machine, plate printing machine, UV furnace, light solid machine, tunnel dryer, ultraviolet lamp and other related equipment and products.

Advantages : super high temperature resistance, long service life, it can not be affected by high temperature for a long time. No black screen, long-term stability data without calibration.


250nm-410nm UV Light Meters Equipment


Technical Data:

Spectral range: UV 250-410nm

Measuring range: 0 to 5,000mW/cm2

Display range: 0 to 999,999 mJ/cm2

Power source: long-life 3.6V Lithium Battery

Power consumption: 100uA

Battery service life: 10,000hrs

Dimensions: 5.5”(140 mm)φ, 0.5”(13mm) height

Weight: appro x 16 oz (450 gr.)

Temperature range: 0 to 45°Celsius

While on the conveyer belt, the UV-Integrator 140 can withstand max. 230°F(110°C) for up to 1O seconds.


Attention:

1.Please avoid shaking the UV-Integrator 140.

2.UV-light is hazardous to your health. Avoid direct UV-light to your eyes and to your body.


Warranty: 1 years from the date of purchase.


The heat dissipation effect of UV DESIGN UV Integrator 140 is better than that of UV 150, because the plate UV INT 140 is larger and the heat dissipation is faster. Under the same temperature and the same type of equipment, the data obtained by the UV Integrator 140 test is more accurate.


250-410nm UV Radiation Measurement


UV-DESIGN UV Lamp Intensity Meter UV 140 Integrator Tester