400X200mm Portable High Efficiency UV LED Curing Machine For Coating

The UVLED head of the machine is integrated with imported high-intensity ultraviolet LED. The UV spectrum wavelength is 365nm. Portable High Efficiency UV LED Curing Machine for Coating supports external signal input and triggering. It can be used in semi-automatic or fully automatic production lines. The conveyor belt is made of Teflon.

Specification Sheet :

wavelength : 365nm

Model : DSX-S480-400X200-365

Electric power : 1440W

Optical power density : 1700MW/CM2

Irradiation area : 400X200mm

Heat dissipation method : Air cooled

Overall size : L1500mm*W670mm*H1149mm

Product Overview ：

LED UV curing machine replaces traditional mercury lamp, built-in UVLED curing light source, low temperature, no ozone, no deep ultraviolet, low energy consumption, high efficiency, no infrared radiation, cold light source, suitable for curing of various heat sensitive materials UV glue, infrared transmission Intelligent control, start-stop control on demand.

 

UV LED advantages ：

Replace the mercury lamp!

Extra-long life: 25000h~30000h

Energy saving: save 80%  electrical energy than  Mercury lamp

UV output adjustment: From 1% to 100%

Multiple control modes :  Constant current, pedal control, intelligent optical and manual modes

Photoelectric induction, instant on/off, no preheating required.

No mercury, No Ozone, eco-friendly

Cold light source, low temperature

Stable output, high uniformity.

200x150mm High Speed Desktop LED UV Curing Machine

The UVLED head of the machine is integrated with imported high-intensity ultraviolet LED. The UV spectrum wavelength is 365nm. The effective curing area is 200X150mm. 200x150mm High Speed Desktop LED UV Curing Machine supports external signal input and triggering. It can be used in semi-automatic or fully automatic production lines. The conveyor belt is made of Teflon.

Specification Sheet :

Model: DSX-SL140-200X150-365

wavelength : 365nm / 395nm

Model : DSX-S480-400X200-365

Electric power : 420W

Optical power density : 1000MW/CM2, 2000mW/cm2

Irradiation area : 200*150mm

Heat dissipation method : Air cooled

Overall size : L1000mm*W580mm*H300mm

High Intensity 100X100mm LED UV Curing Equipment For Coating Printer

100X100mm LED UV Curing Equipment  is a high performance UVLED surface light source curing system designed for UV adhesive curing. The system mainly includes control system, UVLED head and conveyor belt. The UVLED head of the machine is integrated with imported high-intensity UV LED. The UV spectrum wavelength is 365nm. The effective curing area is 100X100mm, which supports external signal input and triggering. It can be used in semi-automatic or fully automatic production lines. The conveyor belt is made of Teflon.

Specification Sheet

wavelength:  365nm

Model: DSX-S256-100X100-365

 Electric power:  768W

 Optical power density:  3500MW/CM2

 Irradiation area:  100X100mm

 Irradiation height:  10mm 

 Cooling method:  Air cooled 

 Overall size:  L1000mm*W390mm*H1016mm

Product Overview

LEDUV curing machine replaces traditional mercury lamp, built-in UVLED curing light source, low temperature, no ozone, no deep ultraviolet, low energy consumption, high efficiency, no infrared radiation, cold light source, suitable for curing of various heat sensitive materials UV glue, infrared transmission Intelligent control, start-stop control on demand.

 

Advantage :

1. Instant drying: avoid waiting for drying time, greatly shorten the time of coating process.

2. Directly with the coating machine manufacturer: can connect the roller type or the curtain coating machine, the finished product is directly dry after the coating, avoid the transportation trouble.

3. The surface hardness of the coating is improved and the color is bright.

4. Extensive drying function: wood, board, furniture, steel plate, building materials, lens, leather and other UV coating after coating drying.

5. Fast curing speed, high production efficiency, the curing mechanism is a kind of free radical chain reaction, the cross linking solidification in an instant.

Application :

200X50mm Desktop UV LED Curing Conveyor For Screen Printing

Desktop UV LED Curing Conveyor LED UV curing machine replaces traditional mercury lamp, built-in UVLED curing light source, low temperature, no ozone, no deep UV, low energy consumption, high efficiency, no infrared radiation, cold light source, suitable for curing various thermal sensitive materials UV glue, infrared sensor intelligent control, start and stop control as required.

Product Overview

This is a high performance UVLED surface light source curing system designed for UV adhesive curing. The system mainly includes control system, UVLED head and conveyor belt. The UVLED head of the machine is integrated with imported high-intensity UV LED. The UV spectrum wavelength is 395. /405nm, effective curing area of200X50mm supports external signal input and triggering, can be used with semi-automatic or fully automatic production line, the conveyor belt material is Teflon.

Specification Sheet

wavelength:  395/405nm

Model: DSX-S440-200X50-395/405

 Electric power:  1320W

 Optical power density:  12000MW/CM2

 Irradiation area:  200X50mm

 Irradiation height:  10mm 

 Cooling method:  Water cooling 

 Overall size:  L1500mm*W470mm*H1076mm

200x100mm Vertical Table LED UV Curing Machine For Screen Printing

200x100mm Vertical Table LED UV Curing Machine for Screen Printing The curing device is simple, easy to maintain, and the equipment associated with it is generally smaller than traditional coating equipment, and the equipment investment is low. Coating equipment failure is low, because UV coating does not have ultraviolet radiation will not cure, so will not clog and corrode equipment, coating tool and pipeline cleaning convenient, equipment failure rate is low.

Specification Sheet

wavelength:  365nm

Model: DSX-S200-200X100-365

 Electric power:  600W

 Optical power density:  1000MW/CM2

 Irradiation area:  200X100mm

 Irradiation height:  20mm 

 Cooling method:  Air cooled 

 Overall size:  L1500mm*W570mm*H1080mm

Product Overview

UVLED curing machine, replacing traditional mercury lamp, built-in UVLED curing light source, low temperature, no ozone, no deep ultraviolet, low energy consumption, high efficiency, no infrared radiation, cold light source, suitable for curing of various heat sensitive materials UV glue, infrared Sensing intelligent control, start and stop control on demand.

Advantage :

1.Extra-long life: 25000h~30000h

2.Energy saving: save 80% electrical energy than Mercury lamp

3.UV output adjustable: from 1% to 100%

4.Multiple control modes: constant current, peal control, intelligent optical and manual modes

5.Photoelectric induction, instant on/off, no preheating required.

Three-Sided LED UV Curing Machine UV Adhesive Curing Equipment

Three-Sided LED UV Curing Machine UV Adhesive Curing Equipment is a high-performance three-sided UV curing machine system designed for UV adhesive curing. The system mainly includes control system, UVLED head and conveyor belt. It is illuminated by top and two side light sources and has good curing effect. And the light source area can be customized.

Specification Sheet

Wavelength :  365nm 

Model : DSX-3S228-100X100-365

Electric power :  684W 

Optical power density :  1000mW/cm2 above, 800mW/cm2 on the left and right 

Irradiation area :  100x100mm above, 120x30mm left and right 

Irradiation height :  5-10mm 

Cooling method:  Air cooled 

Overall size:  L800mm*W450mm*H410mm 

Product Overview

The top irradiation area is 100mm*100mm, the irradiation area on both sides is 120mm*30mm, no infrared radiation, cold light source, suitable for curing of various heat sensitive materials. It does not need to be warmed up at the start-up, it is ready to use and instantly reaches the maximum light intensity. Power saving, easy to control. Contains no mercury, does not produce ozone, safe and environmentally friendly infrared sensor intelligent control, start and stop control on demand.

Advantage :

1.Photoelectric induction, instant on/off, no preheating required.

2.Low energy consumption, just 20% of the ordinary UV lamp.

3.No mercury, no Ozone, eco-friendly.

4.Cold light source, low temperature.

5.Stable output, high uniformity

500*400mm Large Area UV Light Source LED UV Curing Machine

500*400mm Large Area UV Light Source LED UV Curing Machine is a high performance UVLED curing machine system designed for medical catheter filter UV adhesive curing. The system mainly includes control system, UVLED irradiation head and conveyor belt. It is illuminated by 500*400mm surface light source and has good curing effect. The whole machine and light source area can be customized.

Specification Sheet

1. UVLED head

Wavelength: 365nm

Model: DSX-SL600-500X400-365

Curing area: 500X400mm

Optical power density: 600w/cm2

Recommended irradiation distance: 10-100mm

Dimensions: L570*W456*H88mm

2. Control System

Panel display, touch operation, real-time monitoring of the working state of the head

Power 0-100% adjustable, conveyor speed adjustable

Temperature monitoring

Infrared sensing control, working mode selection

Machine size: L1500*W770*H1100mm

Product Overview

* The heat radiation is small, the irradiation machine can choose different wavelengths such as 365/395/405nm, no infrared spectrum is emitted, no high temperature heat.

* Produce high-energy, high-purity ultraviolet light, and use the latest high-energy ultraviolet LED to quickly complete the curing of UV glue, greatly improving production efficiency.

*Energy saving and environmental protection, low power consumption of LED, no need to preheat when used, instantaneously reach 100% high power, that is, power can be adjusted, that is, on or off, power saving ratio ≥1:6, high efficiency of ultraviolet photoelectric conversion, and not It contains mercury, no dark ultraviolet skin cancer, and no ozone. It is a safer and more environmentally friendly alternative to traditional light sources.

*Integrated design, equipment installation is convenient and fast, just use the light source to install, the height of the light source can also be adjusted according to specific needs.

UV LED Curing Machine For UV Adhesive Curing On Lithium Cell

Lithium-Ion Battery Module LED UV Curing Machine for UV Adhesive Curing is a high-performance UV LED curing machine system designed for the curing of lithium battery module UV adhesive. The system mainly includes control system, UVLED irradiation head and conveyor belt, and the two sides are illuminated, and the special parts can be dispensed for the top surface. It has a good curing effect, and the whole machine and light source area can be customized.

Specification Sheet

1. UV LED head

Wavelength: 365nm

Model : DSX-II

Curing area: 240X100mm

Optical power density: 1100mw/cm2

Recommended irradiation distance: 10-100mm

Dimensions: L260*W160*H80mm

2. Control System

Panel display, touch operation, real-time monitoring of the working state of the head

Power 0-100% adjustable, conveyor speed adjustable

Temperature monitoring

Infrared sensing control, working mode selection

Machine size: L1000*W500*H1050mm

Product Overview

* The heat radiation is small, the irradiation machine can choose different wavelengths such as 365/395/405nm, no infrared spectrum is emitted, no high temperature heat.

* Produce high-energy, high-purity ultraviolet light, and use the latest high-energy ultraviolet LED to quickly complete the curing of UV glue, greatly improving production efficiency.

*Energy saving and environmental protection, low power consumption of LED, no need to preheat when used, instantaneously reach 100% high power, that is, power can be adjusted, that is, on or off, power saving ratio ≥1:6, high efficiency of ultraviolet photoelectric conversion, and not It contains mercury, no dark ultraviolet skin cancer, and no ozone. It is a safer and more environmentally friendly alternative to traditional light sources.

*Integrated design, equipment installation is convenient and fast, just use the light source to install, the height of the light source can also be adjusted according to specific needs.

UV LED TP Side Curing UV Curing Machine

The UV-LED TP side solid machine UV LED TP Side Curing UV Curing Machine is mainly used in the curing of the TP industry to solve the side and overall curing of the touch screen in one time, which is more efficient and convenient.

Product Overview

Equipment Name: UVLED TP side curing, this curing machine

1.illuminant (effective illumination width): (customizable) side curing: 8mm ; this curing: 200mm

2.The distance between the UV LED lamp and the conveyor belt is adjustable: 10-50mm;

3.UV LED lamp power density: side curing: 2000mw / cm2; the curing: 850mw / cm2;

4.UV light intensity adjustable: 1%-100%;

5.Reflector: The aluminum reflector has imported reflective aluminum, which has high reflection efficiency and long service life;

6.conveyor belt width: 400mm;

7.Conveyor belt material: Teflon mesh belt or stainless steel mesh belt for self-selection;                      

8.conveying speed: 1-10 meters infinitely adjustable;

9.The LED lamp bead is on and off, no preheating is required, and the curing work starts immediately;

10.roller: surface knurling to ensure smooth delivery;

11.the whole machine cooling method: air cooling;

12.the whole machine material: sheet metal;

13.the machine appearance: spray computer white

14.the machine specifications: 2100L * 620W * 1050Hmm;

15.power wiring: 220VAC 50HZ;

Parameters :

1. Controller:

Type		XYUV-2
Outside Dimension		L390mm*W355MM*H100mm
Number of Contacts Available		Two
Power Consumption		20W
Termianl I/O	Input	Foot switch and serial RE-232 communication signal
	Output	Serial RE-232 communication signal
Supply Voltage		AC100~240V±10% (50/60 HZ)
Ambient Temperature and Humidity		Ambient temperature : -10℃~50℃ Relative humidity : 20%~85% RH
Dimming / Irradiation Control		Digital dimming, manual irradiation control or timing control (0.1~9999.9s)
Set the Operation		Use operating switch setting, key switch, RS-232, power switch
External Control		External Input	Individual irradiation input, irradiation stop input, interlock, all irradiation input
		External Output	READY signal, the error signal, warning output, +5V output (light is used)

2. Illumination head:

Type of UV LED Light Source	Curing	Wavelength nm	Power W	Optical Power Intensity mW/cm2	Spot Size mm*mm	Irradiation Height mm	Cooling Method	Controller
DSX-S60-300XB-365	Side curing	365	180	2000	300*8	5-20	Air cooling	XYUV-2
DSX-S420-350X200-365	curing	365	1260	850	350*200	5-20	Air cooling	XYUV-2