LED UV Curing Box Uniform Illumination Ultraviolet LED Light Source Solidify Optical Lens Bonding UV Glue

 UVA LED UV Drying Chamber is a very convenient process, it greatly cuts down the drying time. However, certain materials which need to be UV cured are heat sensitive. This issue can make it difficult to take advantage of the fast curing speed of these materials with regular UV mercury lights. The LED UV curing chamber is the solution to that problem.

LED ovens have no warm-up time, which means you can start using the highest intensity available on the unit immediately.

The LED UV Curing Device can be offerred several options for your different power needs. The right size, power, wavelength can be customized. Welcome to consult.

Specifications of LED UV Curing Light Oven :

In-put Voltage	100~240V，50~60Hz
Peak Power	100W
Outside Dimensions	L300* W280* H150mm
Capacity of the Drawer	L195* W195* H20mm
Naked Weight of Machine	7KG
Light Source	365nm
Average Irradiation Power	80~300mW/cm²
Display Panel	Four-digit
Heat Sink	Two Fan
Protector	Switch-Fuse, circuit breaker, grounding connection

Applications of UVA LED UV Curing Chamber :

This equipment is suitable for mobile phone case, CD, UV coating, touch screen, LCD screen, dry glue (LOCA), water glue, LCD bonding, mobile phone screen OCA, optical lens, audio UV shadow glue curing and other fields.

Characteristics of Light-Shielding LED UV Curing Box :

Drawer type sealing operation, the use of more safe, no need to preheat that is out of box, free setting curing time, drawer closed will automatically start, drawer open will automatically turn off the light, brightness adjustable, high light effect curing, fast speed.

1. UV LED curing light source, which is uniform, stable, strong light, shorten the curing time of products, improve production efficiency.

2. Low thermal radiation, it is suitable for liquid crystal edge sealing, plastic substrate, film printing, medical equipment, optical lens and other occasions with temperature requirements.

3. Low power consumption, which is 10% of traditional mercury lamp curing machine, it can save 90% power.

4. Long service life, LED service life can reach 10000-20000 hours, saving the cost of consumables.

5. No preheating, ready to use, instant light intensity

6. Safe and environmentally friendly, mercury free and ozone free

7. UV LED surface light source can be customized according to customer’s actual application

Light Shielding LED UV Curing Systems

What Are The Advantages Of An Offset Press With UV LED Curing System

Offset printing is one of the main printing methods, with the development of UV LED curing ink and coating technology, UV LED curing system is gradually replacing the traditional UV curing. At present, there are also printing factories for offset printing press equipped with UV LED curing system.

1. Why can UV LED Curing System replace Mercury Lamp?

Mercury lamps have a shorter life, usually about 1000 hours.

Mercury lamp should be preheated before use, and can not restarted immediately after extinguished in the process of use, and then start slowly, affecting production efficiency.

Mercury  lamp spectrum is relatively wide, photoelectric conversion efficiency is slow, power consumption, increase the cost.

Mercury lamps contain toxic substances such as mercury and are not environmentally friendly.

2. What are the advantages of UV LED Curing Systems?

UV LED as a cold light source, no infrared thermal radiation, will not cause thermal effect and deformation, suitable for all kinds of thermal sensitive materials curing.

The service life of UV LED is long, generally about 20000 hours, which is more than ten times of the traditional mercury lamp, reducing the frequency of equipment and the impact on production caused by the replacement of equipment.

Energy saving, power consumption is only 30% of traditional mercury lamp curing machine, saving cost.

Immediately on and off, without preheating before use, the maximum power output can be reached immediately after opening, and the number of switching does not affect the service life.

Suitable LED UV Curing System Machine for Offset Printing can be customized according to the actual needs of customers.

Safe and environmental protection, no mercury, no heavy metal harmful substances, will not produce ozone, safe, environmental protection, energy saving, is a safer and more environmentally friendly alternative to traditional mercury lamp.

Advantages Of UV LED Curing Systems In The Filed Of Optical Film Coating Curing

 UV LED light curing was born, after years of development, in optics, industry, medical, printing, new energy, optical communication, electronic assembly and other industries have a wide range of applications, among which optical film field, is also the industry in recent years to pay attention to.

According to network data, optical film, as the core hardware of smart TV display, benefits from the smart TV room, the market demand for optical film will be released quickly and continue to flourish. Based on the requirements of environmental protection, as well as the characteristics and special application of the optical film itself, the market has higher and higher requirements for the optical film coating industry, and the UV curing process has also changed from the traditional mercury lamp to the more environmentally efficient UV LED light curing equipment.

Compared with traditional mercury lamp, UV LED cuing system machine has significant advantages :

1.UV LED curing light source is cold light source, which will not cause thermal stress and deformation, and will not affect the product performance because of high temperature. It is suitable for the curing of thermal sensitive materials.

2.The service life of UV LED curing light source can reach 20,000 hours, which is 10 times that of traditional mercury lamp, and there is no need to preheat before use. It can be used on the go, saving time.

3.UV LED light curing equipment will use up to 70 percent less power than mercury lamps, saving money.

4.Each unit of the DSXUV UV LED curing equipment can be controlled independently, and the optical power intensity can be adjusted in the range of 1-100%, which can be adjusted according to the actual demand, not only to save energy, but also to effectively control the capacity.

5.DSXUV UV LED light curing system machine is a pollution-free product, does not contain mercury pollution, is environmentally friendly and meets requirements of environmental protection policy.

At present, the optical film industry in the use of UV lamps will tend to choose UV LED curing systems, DSXUV will actively cooperate with the optical film production enterprises to develop suitable UV LED curing equipment, for the development of the optical film industry and environmental protection and energy saving cause to contribute our modest force.

Online Double Sides UV LED Curing System Production Line for Coating Pri...

UVC LED Sterilization Low Resistance High Efficiency Disinfecting Mask

 Efficient low resistance butterfly filter to filter most of the bacteria and viruses, a small amount of filter did not intercept virus particles, in the cone inlet valve will be instantly inactivated by the ultraviolet lamp.

Production Parameters :

Mask Type	Super protective low resistance sterilization mask
Haze filtering rate	99.99%	Duration of screen use	240h（1-2 months）
Mesh material	Melt-blown fabric	Intake resistance	≤35pa
UVC UV LED Power	2-4mW	Exhaust resistance	≤25pa
Lithium battery capacity	500mah	Charging voltage	DC 5V
Voltage rating	3.7V	Working hours	6h
Charging time	About 2 hours	Weight of product	68g
Size of product	L113*W65*H103mm	Virus filtration rate	99.9%

Product Anatomy Diagram :

The breathing resistance of the super protective mask is only 1/3 of the N95 mask.

The expansion area of folding filter screen is 400cm2

Refuse Fuggy Mask :

The respirator has a built-in intake valve and exhaust valve, and the exhaust gas is discharged by the exhaust valve, which will not pollute the filter screen and prolong the service life of the filter screen. The large flow area of the exhaust valve is conductive to the timely discharge of wast gas, smooth breathing and not stuffy.

Duration of screen use :

240 hours (1-2 months)

Light as nothing, relaxed and comfortable

The weight is equal to an egg, net weight 68g

Built-in lithium electricity :

The battery lasts for a long time and charges quickly. Pluggable charging bank through the USB jack, charging or power supply, free to extend the working hours.

Qualification :

Full Automatic Nitrogen UV Tape Curing Machine Separate UV Film From Wafer Semiconductor

Automatic UV Wafer Tape Curing Systems are highly efficient and cost-effective semiconductor assembly equipment, high performance UV exposure uniformity and fast curing times.

Advanced circuitry and design with multiple features and options -- coupled with essentially zero downtime -- make DSXUV-N2-250250 Series an ideal choice for fast, uniform, and cost-effective UV LED curing requirements.

W : leduvcuring.com

P : +86-18924372460 Jennifer

Same as WhatsApp/Skype.

If necessary, please contact us for detailed specifications and parameters. 

Product Parameters:

Outside dimension	L546.2*W519.63*H376.9mm	Compatible size	250X250mm
Cooling method	Air cooling	Input power	100-240V AC 50-60HZ
Total power	1500W	Wavelength	UV LED 365nm
Drawer capacity	L348mm * W368mm * H15mm	Intensity	>600mW/cm2
Material / Weight	White metal plate / naked machine 50kg	Display	Touch screen
Function	Adjustable time and illumination	Irradiation direction	Bottom-up

Operations:

1.Put in the board and close the door

2.Automatically start filling with nitrogen

3.Automatically turn on the light and release the glue after being filled with nitrogen

4.Automatically turn on the light for curing, and turn off the nitrogen after debonding

Applications:

1. Suitable for optical lens, LED, IC, semiconductor, integrated circuit board, mobile hard disk, thermopile, sensors and other semiconductor materials, glass filter, etc., UV film debonding, UV tape break away from stuffs.

2. UV LED Tape Curing Machine is a kind of UV film and cutting film tape viscosity reduction and viscosity removal of automatic UV LED Curing Equipment.

3. Wafer, crystal round, glass and other materials, using UV tape adhesive for 6inch 8inch 12inch and 15inch of support to handle the glue device, has the efficient unglued ability, can quickly reduce the adhesion of UV tape on materials.

Characteristics :

1.High power UV LED, debonding speed is fast

2.Adjustable time and brightness, touch screen operation, simple and convenient.

3.The addition of nitrogen can exhaust other interfering gases

4.UV LED is cold light source, environmental protection products, with low temperature, uniform exposure, compact structure, low energy consumption, semiconductor industry is the ideal model, and low temperature to thermal-sensitive materials without damage.

5.The service life is more than 10 times longer than that of ordinary mercury lamp, with a continuous service life of 15000-30000h.

6.Zero maintenance cost, no need to replace the light source parts for long-term work.

7.Closed light source design, no ultraviolet side leakage, no damage to human body.

Features :

1. UV irradiation of 365nm wavelength

2. Manual loading, automatic UV process

3. Ideal for low volume and RnD applications

4. Compatible with size of 12’’ version and below

5. Frame or ring curing

6. Special box design to avoid UV leakage.

7. Automatic timing, warning device, easy to operate, high efficiency.

8. The device is heat-resistant and reinforced filter, which blocks the heat source and reduces the high temperature trouble.

9. Special heat sink to protect the lamp and extend the life of the lamp.