Original Binding 250nm-410nm UV INT 150 UV-Integrator Radiometer

 The UV-150 Integrator tester is a high quality UV measuring instrument. It is used to  measure UV energy of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying processes.

The UV-Integrator 150 Energy Meter is used to measure UV energy and UV does of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying process.

Technical Data:

Spectral range: UV 250-410nm

Measuring range: 0 to 5,000 mW/cm2

Display range: 0 to 999,999 mJ/cm2

Display: 6-digit LCD

Power source: long-life 3.6V Lithium Battery

Power consumption: 100uA

Battery service life: 10,000hrs

Dimensions: 3.5” (90mm)φ, 0.5” (12mm) height

Weight: approx5.5 oz(150 gr.)

Temperature range: 0 to 70 Centigrade

Temperature range: 0 to 45°Celsius

While on the conveyer belt, the UV-Integrator 150 can withstand max. 230° F(110°C) for up to 1O seconds.

Heat protection: Heat shield on back plate

Base Accuracy: +-5 %

Instruction for use:

1.Switch on the UV-Integrator 150.

The display will show “0”

2.Place the UV-Integrator 150 with the front facing the conveyer belt.

The sensor is on the back.

The back plate of the UV-Integrator 14 serves as the heat shield.

3.After the UV-Integrator 150 has passed through the conveyer, take the UV-Integrator from the conveyer belt in order to read the measuring result.

The measuring results are shown as: mJ/cm2

4.Prior to new measuring sequence, it is necessary to switch “off" and then “on” again.

This will reset the display to “0”.

Continue as described in Step 2.

Calibration:

In order to keep its full function and precision it is recommended to have re-calibration done once per year.

Re-calibration will also be necessary after change of battery.

Warranty: 

1 years from the date of purchase.

UV-DESIGN UV Integrator 140 High Temperature Resistance Ultraviolet Energy Measuring Instrument

Standard UV INT140 Integrator is measuring an integral in the spectral range from 250-410nm, with a peak at the area of 330nm.

Big size round shape UV-Integrator 140 UV Lamp Intensity Meter Tester for measuring UV dose (mJ/cm2), diameter 140 mm, height 13 mm, various spectral ranges available. Special feature: Kidney shaped recess in the housing for convenient handling.

By addition of the incidence of the light quantities during the exposure cycle, relative values are calculated.

Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings may appear under the same measurement conditions.

Brand : DESIGN

Place of origin : Germany

Name : UV Integrator 140

Application : UV printing, coating, glue, ink curing, drying, glazing and other fields

Industry : mobile phone shell, PCB, UV board, floor, plastic keys and other electronic industries and a variety of other industries.

Applicable equipment : UV LED light curing source, UV exposure machine, plate printing machine, UV furnace, light solid machine, tunnel dryer, ultraviolet lamp and other related equipment and products.

Advantages : super high temperature resistance, long service life, it can not be affected by high temperature for a long time. No black screen, long-term stability data without calibration.

Technical Data:

Spectral range: UV 250-410nm

Measuring range: 0 to 5,000mW/cm2

Display range: 0 to 999,999 mJ/cm2

Power source: long-life 3.6V Lithium Battery

Power consumption: 100uA

Battery service life: 10,000hrs

Dimensions: 5.5”(140 mm)φ, 0.5”(13mm) height

Weight: appro x 16 oz (450 gr.)

Temperature range: 0 to 45°Celsius

While on the conveyer belt, the UV-Integrator 140 can withstand max. 230°F(110°C) for up to 1O seconds.

Attention:

1.Please avoid shaking the UV-Integrator 140.

2.UV-light is hazardous to your health. Avoid direct UV-light to your eyes and to your body.

Warranty: 1 years from the date of purchase.

The heat dissipation effect of UV DESIGN UV Integrator 140 is better than that of UV 150, because the plate UV INT 140 is larger and the heat dissipation is faster. Under the same temperature and the same type of equipment, the data obtained by the UV Integrator 140 test is more accurate.

How To Detach a Wafer From The UV Tape By Using a UV LED Curing Light Systems

 Before the chips scribing, the wafer is fixed to the frame with scribing film. After the scratching process is completed, UV light is used to irradiate the fixed film to make the UV film solidify and harder, so as to reduce the stickiness of the scratching fixed film and facilitate the smooth production of subsequent packaging processes. In other words, the UV tape has a strong adhesive strength and holds the wafer firmly during the wafer grinding process or the wafer cutting process. When ultraviolet LED light radiation, the bonding strength will be reduced. As a result, the wafer or chip can easily peel off the tape after UV LED Light exposure. UV LED Curing Systems Machine solves the degumming process of wafer, glass and ceramic cutting process. It is not only commonly used in semiconductor packaging industry, but also for the use of UV film degumming of semiconductor materials such as optical lens, LED, IC, semiconductor, integrated circuit board and mobile hard disk. The UV curing systems in the prior art mostly uses UV mercury lamp. The light source of UV mercury lamp with high heat emission is easy to be damaged by heat sensitive materials, and its efficiency is low, and its quality standard is difficult to be controlled accurately, so it is not suitable for high precision devices such as chips. Shenzhen Deshengxing Electronics Co., Ltd. adopts the environment-friendly low-temperature LED UV Curing Light Source Systems, easy to complete the UV film de-film process, and does not damage the wafer, greatly meet the production needs.

The details of "What is UV Film? UV Adhesive Principle"

Application :

Suitable for optical lens, LED, IC, semiconductor, integrated circuit board, mobile hard disk and other semiconductor materials, glass filter UV film degumming, UV tape degumming use. UV LED Curing Systems is a kind of UV film and cutting film tape viscosity reduction and viscosity removal of automatic curing equipment. The wafer, glass and other materials can be pasted on 6’’, 8’’ and 12’’ brackets with adhesive dissolving device, which has high efficiency of adhesive dissolving ability and can quickly reduce the stickiness of UV Tape on materials.

What Is UV Film? UV Adhesive Principle

 UV film is a special formula UV coating on coated PET, P0, PVC, EVA film base material surface, is a specially designed for semiconductor chips, special optical glass (wafer of silicon, filter glass), special metal and ceramic substrates and flexible electronics and some small thin fragile parts processing production of fixed, protection, bearing with designed a new type of adhesive products. This material adopts specially polyolefin (PO) and polyester (PET) film as raw material, coated with special adhesive, through dust-free high temperature coating process. UV film with high adhesion, high tensile strength, adaptability, balanced extension and other characteristics, easy to fix some small particles or fragile ultra-thin sheet, so that the material in the grinding, processing and cutting process does not slide, do not fly, no water seepage. At the end of the processing, the UV film after a specific ultraviolet energy irradiation to make the tape lose adhesion, it is easy to separate the product from the tape, and no damage, no residue, very good to meet the semiconductor and optical industry special materials processing process. UV tape can be customized according to customer requirements of various thickness, viscosity and processing customer required shape and size. The principle of UV adhesive is mainly concentrated in the adhesive formula to add a photo-initiator, so that it in a specific value of UV LED light curing, trigger the internal function, making the original high adhesive surface suddenly lose viscosity, so as to meet the requirements of the process.

UV LED Curing Equipment Used In Optical Lens Bonding

 

In the field of electronic optics, the use of UV glue for the gluing of optical lenses has been very common. 

When curing UV glue, many manufacturers will choose to use UV LED curing machine instead of 

traditional UV mercury lamp for curing, why? One of the key factors is that the ultraviolet light source 

produced by the UV LED Curing Systems is a single band, and belongs to the “cold light source”, 

no thermal radiation damage and other advantages. In contrast to the traditional UV mercury lamp, 

the use of UV LED Ultraviolet Light can effectively prevent the deformation of the lens when it fits.

The UV LED curing equipment has been mature used in all kinds of gluing requirements of UV glue for 

optical lenses. For the problem of poor curing effect caused by glue leakage at the edge of the lens, the 

UV LED curing function developed and produced by Deshengxing Technology effectively solves the 

problem of bubbles generated in the gluing process of optical lenses or the problem that the lens edge 

solidifies and does not dry.

The type of optical lens UV curing machine can be divided into UV LED Spot Light Source, Large Area 

UV LED Surface Curing Light Source, and Linear UV LED Curing Light Source according to the cured 

area. For example, a 200*100mm UV LED Curing Systems is supplied to a manufacturer of high 

precision optical lenses in Guangdong, China. The first test result is OK. After some testing, the 

irradiation area, illumination intensity, curing time of the customized 100*200mm UV LED Curing 

Systems are very in line with the customer’s requirements. The customer promptly placed an order 

for two UV LED Curing machine after we quoted a reasonable price.

injecting glue into the optical lens

What Applications Does UV 365nm Curing Bonding Use?

 UV glue bonding makes economic automatic assemble of medical instruments easier. Now, advanced LED UV Curing Light Source can solidify solvent-free UV glue in seconds, and the dispensing system is an effective and economical way to form a consistent and repeatable adhesive during the assembly process of the medical devices. The optimization and control of Spot LED UV Solidification light source is very important for the manufacture of reliable medical devices. Using UV curing glue provides many advantages, such as lower energy requirements, saving curing time and location, improved productivity, and easier automation. UV glue is generally used to bond and seal medical instruments, these medical instruments need very high quality and the best reliability. UV glue curing is typically used in medical device assembly where bonding is required, 1) to different materials (or mechanical properties are different), 2) the materials are not thick enough to use the soldering method, 3) pre-produce sub-parts.

App 1 : fast curing UV adhesive for bonding glass and metal

App 2 : quick curing UV three-resistant paint on the circuit board

App 3 : fast curing UV ink printed on the shirt

App 4 : instantly curing UV glue for bonding disposable medical catheters, containers or other medical equipment

App 5 : instantly solidify the colored UV ink on the plastic mobile phone case

App 6 : instant curing bonding between the electronic paper book display surface and the protective film UV water glue

App 7 : instant solidify and bond all kinds of crystal, glass and other handicrafts, commemorative plaque, key chain UV glue, as well as UV varnish on wood surface

App 8 : instant curing UV adhesive for bonding all kinds of LCD glass and its gold pins, as well as curing UV sealant for the end of LCD

App 9 : instant uniform curing UV adhesive bonding all kinds of touch screen and screen protective film