Manual Wafer Laminating Machine Wafer Backgrinding Mounter 6 8 12 Inches

 The special saving film design can greatly reduce the film cost, and equipped with air flexible elastic (elastic adjustable) pressure roller and desk tray design. DSXUV Manual Wafer Lamination Machine not only can adapt to different thickness of the product, can also minimize the film stress, so that the product is not hurt. Easy to use, no training can be used immediately.

Mainly functions of Manual Wafer Lamination System:

1.Suitable for blue film, UV film, PET substrate film and double layer coating

2.Optional micro-porous tray for ultra-thin wafers

3.The heated and elastic plate design adapts to wafers of different thickness

4.Special film roller pressure adjustable design

5.Equipped with circumferential cutter and cross cutter

6.Optional electrostatic removal device for ionic wind rod

7.Small size, desktop display type

DSXUV Manual Wafer Mounter Type:

FM150: 6 inches wafer

FM200: 8 inches wafer

FM300: 12 inches wafer

Technical Specification of Wafer Mounting Machine:

Item	Parameters			Unit	Noted
	FM150	FM200	FM300
Wafer size	3-6	3-8	3-12	inch	Glass, ceramic, LED, PCB can be customized according to the size
Minimize wafer thickness	Normal plate: 150um, micro-porous plate: 100um			um
Frame Dimension	6	6/8	6/8/12	inch
Plate heating temperature range	Indoor temperature ~65	Indoor temperature ~65	Indoor temperature ~655	℃
Component replacement time	＜10	＜10	＜10	minute
Machine dimension	850（D）*390(W)*400(H)	900（D）*450(W)*400(H)	1000（D）*550(W)*400(H)	mm
Power supply	AC220	AC220	AC220	V	50~60HZ
Compressed air	0.5~0.8	0.5~0.8	0.5~0.8	MPa

Saving Film Manual Wafer Laminating System:

Specially designed saving film structure, so that the manual laminating machine series become high saving film manual laminating machine. Compared with ordinary manual laminating machine, it can save about 15%, greatly reducing the cost of customers. The cost savings are even more significant when using expensive UV films now or in the future.

Suitable for ultra-thin wafer micro-porous film plate (optional):

Micro-porous plate is with unique air path design and elastic support structure, suitable for up to 100um thickness wafer, glass or ceramics. This structure is equipped with air flexible elastic, and elastic adjustable roller device can minimize the damage to the ultra-thin wafer during the lamination, greatly reduce the probability of breaking.

Anti-static surface treatment lamination plate with heating function and elasticity:

1.With heating and heating temperature range adjustable plate design, to ensure the film bonding effect can be adjusted to the ideal state.

2.The elastic plate disc adapts to wafers, glass or ceramics of varying thickness

3.The anti-static teflon treatment can not only minimize the static electricity generated during the lamination, but also effectively prevent physical scratches on the chip.

6 8 12 inches Manual Wafer Backgrinding Mounter Wafer Laminator

UV-LED Curing Machine Used For High Performance Electronic Components

 Today, with the continuous development of science and technology, the integration of semiconductor and electronic components is becoming higher and higher, and the requirements for UV LED Curing System Machine used in the packaging process of chips and electronic components are becoming higher and higher. DSXUV, as a UV LED curing system machine manufacture, can meet the needs of precision electronic components adhesive and LEDUV curing, can provide a series of mature products.

The following requirements must be met :

1.The strength of UV LED curing machine is to be enough.

Generally speaking, electronic components are mass production. This kind of mass production requires high production efficiency. The higher intensity of the UV LED curing machine and the faster conveyor belt will greatly increase the productivity of a single device. DSXUV LED UV Curing Light Source uses UV LED light chip as the light source, the light intensity is adjustable, can meet the application of a variety of product processes, productivity has several times or even dozens of times of space for improvement.

2.EMC electromagnetic radiation is low:

The higher the integration degree of chips and electronic components is, the higher the sensitivity degree to EMC is, and they can no longer withstand EMC interface emitted by some microwave excited ultraviolet lamps, which makes them have production quality risks. In this regard, DSXUV UV LED Light Curing Equipment as a cold light source, no infrared light, no thermal radiation and EMC interference, more than UV mercury lamp.

3.Heat dissipation of UV LED curing machine is good:

In the long time, high intensity curing work, the heat dissipation of UV LED Curing Lamp Systems is very important. Only the heat dissipation system designed by scientific calculation can guarantee the good operation of UV LED curing system machine.

4.UV LED Curing machine should be small:

High performance components are generally small in size, so the UV LED curing machine is also required to be small in size, which has no impact on other equipment in the production line. And electronic components production workshop environment requirements are very high, such as temperature, humidity and cleanliness. Compared with UV mercury lamp, the integrated design of DSXUV LED UV Light Curing Lamp Machine is more suitable for curing electronic components, and it is flexible and portable. However, UV mercury lamps usually require large distribution cabinet type power supply, fans and conveyor systems, requiring significant adjustments to the factory hardware environment, as well as noise and cleanliness.

About LEDUV Cross-Linked Polyethylene Insulated Cable Equipment

 The technological process of UV Irradiation Cable Crosslinking Equipment is that UV light is used as the radiation source, and the mixed photo-crosslinking polyolefin is extruded and coated on the conductive wire core, and then it immediately enters the special irradiation equipment for melting state optical crosslinking. Photo-crosslinked polyolefin insulated wire and cable products can be obtained after the light irradiation crosslinked insulated wire core is cooled at different temperatures and other subsequent processing.

Cable UV Light Irradiation Crosslinking System Machine only needs to be slightly changed on the original ordinary extrusion production line. The equipment covers a small area, with upper traction, irradiation box, electrical control cabinet, etc., can meet the requirements to produce UV irradiation crosslinking polyethylene wire and cable products. Increase the traction, so that the conductive wire core to maintain a certain tension. Always in the center of the box during operation to ensure the best irradiation effect. The irradiation box adopts uniform configuration and characteristic design of reflective concentrated UV light source, and the electric control system ensures that the ultraviolet intensity and temperature at the center of the irradiation box are in the best working conditions. The efficient optical traction system can quickly trigger polyolefin crosslinking reaction under UV light, so that the equipment can achieve a continuous production speed of tens of meters per minute. The water temperature of hot, warm, and cold is cooled step by step to ensure the stability of the three-dimensional network crosslinking structure.

What are the advantages of LED UV Radiation Polyolefin Crosslinked Machine?

1.More Intelligent

Using intelligent detection system, real-time detection of equipment operating temperature, flexible, dual mode operational

Manual mode: simple and convenient, easy to understand, easy to operate

Automatic mode: intelligent speed measurement system of equipment, real-time online detection of production speed.

The system can follow the speed of production, adjust the UV energy intensity, effectively solve the general crosslinking in the initial stage of line change and the production speed of the tail part of the product crosslinking excessive or insufficient defects, greatly reduce the generation of waste, effective cost saving.

2.More Safety

Earth leakage circuit-breaker

Warehouse door detection system: when the warehouse door is not closed well, the system will issue an alarm to avoid accident

Light source detection system: can effectively avoid the generation of waste

Speed detection system: the system can adjust the UV energy intensity according to the speed of production, and save materials intelligently and effectively

Abnormal tracing system: when the equipment is abnormal, the system is traceable and check the records

3.More Energy-Efficient

DSXUV Intelligent LED UV Light Irradiation Crosslinking Cable Equipment adopts the new process LED, its lamp power consumption is saver 70% than the ordinary crosslinking. The crosslinking speed is more than 2 times of the original, which solves the disadvantages of thick insulation, irradiation impenetrability and slow speed. Small footprint, more reasonable design, economizing steam crosslinking process, greatly improving production efficiency, saving cost and time.

Why do we choose LED UV Crosslinking Equipment

 The advantages of Cable UV Light Irradiation Crosslinking Machine are mainly reflected in: low energy consumption, short time, low cost, small size, easy installation and operation, long life, low maintenance cost, no ozone, green environmental protection.

Why? Please browse the following articles.

1.Low energy consumption

The installed power of the UVLED Type Ultraviolet LED Polyolefin Crosslinking Equipment is equivalent to 1/4 of the original ultraviolet irradiation equipment, 1/30 of the electron accelerator, water or steam needs to be heated for a long time, and the energy consumption of heating is very high.

2.Fast production

The cross-linking uses online extrusion cross-link to reduce the subsequent cross-linking process. Compared with the time required for boiling or steam-assisted silane cross-linking and entrusted electron beam irradiation processing, it saves wire and cable manufacturing time, especially emergency task completion has obvious advantages.

3.Low production cost

Compared with warm water cross-linking and entrusted electron beam irradiation process, the price of UV-irradiated cables is low, and many complicated processes are reduced during the production process, such as the transportation cost of semi-finished cables and the corresponding operator costs.

4.Small in size, easy to installation

Just add a distance of about 2m between the extruder die of the original production line and the warm water tank, and place the irradiator in a space with a width of 2.5-3 meters.

5.Easy to operate

Pneumatic reversal to open the tunnel structure, easy to clean and thread through, simple operation, no complicated process, can be completed by the extruder operator.

6.Long life expectancy of the system, low cost of maintenance

The life of LED devices is about 30000 hours, and the life of other electrical and electronic devices is not less than life general electrical and electronic products, without frequent maintenance. Regular maintenance is to keep the optical lens clean. The consumables are industrial wipes and fume cleaner, which can be done by the operator.

7.Harmful emission radiation and pollution environment friendly

Very high wavelength selectivity, only emit useful wavelengths, no infrared radiation, low calorific value. Very low amount of visible radiation, no light pollution, no short wavelength ultraviolet radiation, no harm to human body, zero ozone emission. Only need to connect a small diameter smoke exhaust pipe and a 2KW fan to remove the low molecular smoke produced when the insulation is extruded to prevent affecting the effect of light irradiation.

8.Environment friendly

“Industrial Hygiene Standards” stipulates that ozone safety standard is 0.15ppm, the ambient air quality standard (GB3095-2012), UV LED ultraviolet Light Cross-Linking Equipment will not produce ozone, and traditional mercury lamp equipment will produce a large amount of ozone, ozone belongs harmful gas.

Good Uniformity Of The Scanning UV LED Curing System Machine

 Opening the cover and inserting the wafer to the glass pane, then closing the lid, the UV LED Exposure Machine will start immediately. Curing is completed after about 10-60 seconds, yielding a consistent throughput of 50 to 180 wafers/hour. Fully adjustable exposure dose ranges between 80 mJ / cm2 to 1000 mJ / cm2.

There are numerous UV LED benefits such as less damage to the workpiece by exposure at ambient temperature, a very long lifetime, low power consumption, and safety for replacing the light source because it does not get hot compared to mercury lamps. Equipped with a high-output LED driver, we can achieve an exposure output over 600mW/cm2 (at 6.5mm work distance).

Feature of 6/8/12inch UV Light Curing Machine: 

Homogeneous Debonding

Specifications of Silicon Wafer LED UV Curing Equipment :

Frame size: 6/8/12 inches

Types of film: UV film

Wafer: 12 inches and under

Radiation light source: LED UV light source, cold light source, 365nm

Intensity: 600-1000mW/cm2

Place the fixture: 6/8/12 inches wafer can switch with each other

Handling mode: manual put in and take out

Product fixed: alignment pin location

Electric power supply: 220V, 350W,8A

Volume: 645mm*620mm*195mm (L*W*H)

Net weight: 40-50KG

Performance of Dicing UV Flim Degumming Machine:

PLC + touch screen, software control

Irradiation time: 1-999s setting

Production capacity per hour: about 200pcs for general products

Pre-charge nitrogen setting

Key Features of Automatic LED UV Curing Systems :

Low costing procurement = Lowest total cost of ownership (COO)!

No development of harmful ozone

Zero warm-up time

Long service life of UV-LEDs (10,000hrs+)

Low intensity drop (5% in 10,000hours)

No thermal influence on the film

Compact and robust table design

Short installation and implementation time

Low maintenance costs

Conforms to IEC204-1 safety standards

Productivity 50-180 wafer / hr.

Good Uniformity of the Scanning UV LED Curing System Machine

What Is UV LED Crosslinking Equipment?

 The process of UV crosslinking is to extrude the special UV crosslinking material onto the conduct or wire core, then immediately enter the UV irradiation crosslinking equipment. Through UV irradiation, the material is instantly cross-linked in the molten state. The whole process is fast, efficient and low energy consumption. Compared with traditional one-step and two-step processes, and silane crosslinked polyethylene insulation processes, UV cross-linking technology has outstanding characteristics.

1.Instead of the traditional steam box or heated water tank, the UV crosslinking device is installed between the plastic machine and the water tank, requiring only 2 meters of space. Easy to install, small footprint.

2.Using special UV crosslinked polyethylene material, the price is cheaper.

3.UV crosslinked polyethylene material is extruded from the head, then immediately irradiated UV light in the UV LED Irradiation Crosslinking Equipment. The material can complete the crosslinking process, can greatly improve the production efficiency, while reducing energy consumption.

4.After irradiation by UVLED Radiation Cable Crosslinking Machine, the hot prolongation and thermal shrinkage of the material is easier to meet the standards.

5.Special low-smoke halogen-free flame retardant polyolefin UV crosslinking materials are selected, and using UV crosslinking equipment for UV irradiation crosslinking, which can replace the traditional electron accelerated irradiation crosslinking process. (except black) It can greatly reduce the cost of investment, convenient extension of wire and cable enterprise product series.

The fourth generation of intelligent LED UV Radiation Polyolefin Crosslinked Equipment developed by DSXUV adopts more advanced design concept, more friendly human-computer interaction interface and more reasonable structure design, which can not only improve production efficiency but also reduce production cost. Compared with the old and similar equipment, our products has obvious advantages.

6.Using the new process LED lamp, the power consumption is 70% less than that of the old irradiation, and the crosslinking speed is more than two times of the original, which solves the disadvantages of impenetrable insulation irradiation and low speed.

7.Stronger UV cross-linking ability of color products (expect black), increased collection device, convenient connection with the factory’s smoke exhaust system, improve the work site environment, meet the requirements of environmental protection.