UV LED Cured Light Source Module Array COB Copper Substrate Based Plate

 Product Details

UV LED Curing Light Source Copper Based Plate is used with 10pcs SMD 3535 LED, all connection in series

Parameters:

Size of PCB: L55*W40*H1.5mm

Material: copper substrate

Size of LED: crosswise 2.2mm, lengthways 4.0mm

Right LED: 3pins, UV 3535 LED (like CREE, XPE, XTE, OSRAM, white light, etc.)

Cautions:

1.If you are not sure if your LED is working, please take a photo and send it to customer service to confirm.

2.When using the drive power supply, be sure to ensure that the LED is fully connected to the power supply before powering on. Do not connect LED lights on power, which is very dangerous and also east to burn LED lamp beads, serious, lamp beads may be directly burnout.

3.All LED beads can not be used for a long time with the battery. The correct way is to refer to the second point. The power drive must be a constant current power supply.

4.All the substrate only plays the role of heat conduction, and cannot completely have good heat dissipation function. When used, it is necessary to install additional cooling system, air cooling or water cooling.

5.Self welding basic knowledge: control the temperature and time. Proper selection and use of low temperature tin and thermal grease.

6.Welded substrate of our company will be tested OK and lit up before delivery. If the light is on, it is normal. DSXUV shall not be liable for any human factors. The lamp beads is blackened and the lamp is not worked due to the over-current, the gold wire is fused, and the lamp has bad cooling, belonging to human causes.

(here is a picture for reference, if you need the UVLEDs, please contact customer service)